Pedro Henriques
Project of the Week of 11/13/06
Project of the week is an injected molded Tag Holder made of Red Cycolac ABS. These parts are roughly 8" x 5" x 1/2" and is used to hold...
top of page
610-703-2389
4201 William Penn Hwy, Easton PA. 18045
Contact-Us
PLASTIC MACHINING SERVICES
Pedro Henriques
Aug 4, 20221 min read
Project of the Week of 05/20/14
Project of the week is a 10 Station Filter Docking Check Valve Distribution Manifold made of Acetal. This part is roughly 26" x 2-5/8" x...
0 views0 comments
Pedro Henriques
Aug 3, 20222 min read
Project of the Week of 05/12/14
Project of the week is a 10 Station Filter Docking Press Station made of Acetal. This part is roughly 26" x 13" x 2-5/8" in size. This...
1 view0 comments
Pedro Henriques
Aug 3, 20221 min read
Project of the Week of 10/13/14
Project of the week are 4 different SAE Port Flanges typically made of aluminum and steel, these however are low pressure and made from...
1 view0 comments
Pedro Henriques
Jul 30, 20221 min read
Project of the Week of 04/07/07
Project of the week is a Door Latch Sensor Housing machined from High Impact Polystyrene. This part was eventually injection molded once...
0 views0 comments
Pedro Henriques
Jul 29, 20222 min read
Project of the Week of 06/05/07
Project of the week is a Dual Balance Wheel Housing made of Black ABS. This part was eventually injection molded once tested and proven....
1 view0 comments
Pedro Henriques
Jul 28, 20222 min read
Project of the Week of 09/04/06
Project of the week is a Medical Clip Stake Holder made of Blue SUSTAPEEK MG. This part will eventually be injection molded once tested...
1 view0 comments
Pedro Henriques
Jul 28, 20221 min read
Project of the Week of 06/23/13
Project of the week is a 7075-aluminum adapter plate we designed and machined for a client to convert an original diesel engine...
1 view0 comments
Pedro Henriques
Jul 28, 20222 min read
Project of the Week of 08/25/06
Project of the week is a Pipe Mount made of black ABS. This part was originally machined from solid 1020 steel and then converted to...
1 view0 comments
Pedro Henriques
Jul 27, 20221 min read
Project of the Week of 01/28/14
Project of the week is a Plastic Peg Manifold made of Natural Acetal. We did aid in the finale design of this part; original part was...
1 view0 comments
Pedro Henriques
Jul 26, 20222 min read
Project of the Week of 07/04/22
Project of the week is a Plastic Wear Plate that supports heavy loads and must be non-abrasive to its mating surfaces. This was...
1 view0 comments
Pedro Henriques
Jul 25, 20221 min read
Project of the Week of 07/25/22
Project of the week is a Plastic Glass Lens Plate originally made from 1060 Aluminum alloy and Acrylic. This part is roughly 5" x 4" x...
1 view0 comments
bottom of page